The LiveManager application allows for full event control with the ability to start, stop, pause, and live index and annotate events. The application syncs with MediaManager software to share meeting metadata, allowing the client to edit their meeting recording in sync with their meeting documentation.
Computer Requirements
Installation of LiveManager requires a Windows based PC with network connectivity to the Granicus Encoding Appliance.
| PC Recommendations |
- Pentium 4 or Newer
- 2GB RAM
- 20GB free Hard Drive space
- Windows XP or Windows 7 (32-bit or 64-bit), Windows 8, Windows 10
- Ethernet Port for LAN Connectivity
- Microsoft Edge or Internet Explorer 8 or higher set as the default web browser
|
| Installed Windows Components |
- Microsoft .NET Framework 4.0
|
| Installed Software |
- Office 2003 or newer (full apps or viewers required for document reading)
- Adobe Reader 10 or newer (for document reading)
|
Network Requirements
IP Addresses must be set statically to the device itself.The following table describes the network ports, connection direction, and communication protocols used by LiveManager. If the direction of the connection is outbound, the port indicates the port number of the application’s remote host connection. If the direction of the connection is inbound, port indicates the port number of the application’s local host listening for incoming connections.
| Granicus IP Address Ranges |
- 69.5.90.0/24
- 34.223.64.144/28
|
| Outbound TCP Ports |
To the Granicus Encoding Appliance for client application connectivity:
To the Granicus Cloud for access to the Granicus Platform (MediaManager):
|
